Author: myDevices Cayenne Team

Preparing your Raspberry Pi

Power on your Raspberry Pi. Connect the power adapter to your Raspberry Pi. Connect the Pi to the Internet. Connect your Raspberry Pi to the Internet using an Ethernet cable. Or, if you have a Wi-Fi dongle setup already this works too. Make sure the Raspbian operating system is installed. Cayenne works with Wheezy and … Continued

Introduction

This guide will help you to understand how to get started using Cayenne and give you the most comprehensive overview of all the features. If you want to jump straight into playing with Cayenne, check out Getting Started.

Cayenne Documentation

Note: This guide is a Work in Progress.  We are constantly adding content and making improvements to it. Please share any feedback and suggestions on how we can make it better. We’re listening.

Getting Started

You can use the Getting Started guide to help you get started using Cayenne in minutes. We’ve prepared a guide for getting started with the Cayenne mobile app as well as the Online Dashboard. Both guides will cover the same information, so select the appropriate guide depending upon whether you want to start with the … Continued

Getting Started with the Cayenne App

This guide will help you get started using Cayenne in minutes. We will quickly cover the following: Installing the mobile app onto your device Creating your account Discovering and setting up Cayenne using the mobile app Configuring your first sensor (Temperature) Configure your first actuator (LED Switch) Setting up your first trigger

myDevices at IoT Evolution Expo

myDevices will be exhibiting at IoT Evolution Expo at the Greater Ft. Lauderdale/Broward County Convention Center in Florida from January 25th to the 28th.